TSafe can be an Inclinometer, a HVDS High Voltage overhead cable detection system or both. Combine this with it’s optional wireless technology and full event data recording the TSafe is a safe investment incorporating the latest technology.
The TSafe system features a new two axis inclinometer that can monitor the vehicles angle side to side and front to back up to a maximum of 23 degrees in 0.1 degree increments, to enable the TSafe system to be used on almost any type of vehicle from a small tipper to a large quarry dump truck. We have also incorporated a body raised sensor which allows separate alarm angles to be programmed for when the body is raised or lowered.
High Voltage Detection System 'HVDS'
Building on our vast experience of Overhead Power Cable Detection the new TSafe system has the most advanced HVDS yet. New detection circuitry gives almost double the detection range, sensitivity and noise rejection over existing HVDS units. The TSafe’s HVDS can be fully adjusted to suit the operating environment and gives a visual indication of detected signal strength and range. A new high gain detection antenna further improves the systems detection capabilities giving full 360 degree high voltage cable detection out to 25mtrs on 11kV overhead power lines.
The TSafe sensor modules can be either hard wired or wirelessly connected back to the in cab display making installation and servicing very simple. There is also the ability to add up to 4 HVDS nodes to expand the High Voltage Detection Coverage on large vehicles and cranes.
Data recording - event logging
The TSafe system has detailed event logging which records all alarm warnings, parameters and settings against a time and date stamp. In the event that an incident did happen then this data can be reviewed similar to that of a black box flight recorder.